Waterproof Flexible LED Light Strip
If you're interested in our products, kindly pls send us your e-mail address, more information will be sent to you!
Technical Parameters
| Name |
LED Flexible Strip |
| LED Light Source |
3528, 2835, 5050, 5630, 5730, 335, 3014 SMD LED, 5mm Dip LED |
| Viewing angle |
120 degrees |
| Working voltage |
DC12V, DC24V, AC110V, AC220V |
| Color |
White, Warm white, Natural white, Red, Green, Blue, Yellow, RGB |
| PCB Width |
8mm, 10mm, 11.5mm, 12mm, 13.5mm, 15mm, 20mmLED |
| Quantity per meter |
30led, 54led, 60led, 72led, 84led, 96led, 120led, 168led, 240led |
| Waterproof rate |
IP20, IP33, IP65, IP67. IP68 |
| Waterproof method |
Surface Epoxy Plated, Silicone Pipe, Full Silicone Gel |
| Packing |
5m/roll, 1roll/bag |
Product Advantages
Epistar chip
Available in all colors
LED strip divided by every 3 leds
LED strip with 3M self-adhesive back sticks to underground
Easy installation dedicated for room- and deco-light!
The matched connector for easy install after cutting strip
The overall height allows installation in narrow places
Low power consumption and high brightness output
Certification: CE & RoHS compliant
Applications
Idea for in advertisement and cabaret, cabinet, furniture, landscape and architectural lighting
Edge-lighting of transparent or diffused materials.
Path & Contour Marking.
Emergency / rescue signs.
To couple light into transparent or diffused glass .
Architectural lighting, villa, restaurant, hotel, meeting room, show room, shop, counter and so on.
General lighting, Task lighting, Household appliances, Architectural lighting, Decorative / pathway lighting, Street lighting
Safety Information
The SMD light ribbon itself and all its components may not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board.
Installation of LED light ribbon (with power supplies) needs to be comply with all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Correct electrical polarity needs to be observed. Wrong polarity may destroy the ribbon.
Parallel connection is highly recommended as safe electrical operation mode.
Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the ribbon.
Please ensure that the power supply is of adequate power to operate the total load.
When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical insulated points between ribbon and the mounting surface.
Please pay attention to standard ESD precautions when installing the ribbon.
Damaged by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
Producing Line
Contact
Peony Jin
Mobile:0086-180 0253 2737
Please feel free to send us your inquiry, We are at your service any time!
Audited Supplier 
){kind=link}
){kind=link}